Why Cement and RMC Operations Need GPS Tracking
Ready-mix concrete has a usable life of just 90-120 minutes from the time it leaves the batching plant. If a transit mixer arrives late to the construction site, the entire load may need to be discarded — a loss of Rs. 15,000-25,000 per trip. GPS tracking ensures every load reaches its destination on time.
Key GPS Applications for Cement Fleets
1. Real-Time Dispatch Management
- Live location of all transit mixers on a single map
- Identify the nearest available vehicle for each order
- ETA calculation using live traffic data
- Automated dispatch sequencing for continuous pours
2. Route and Time Monitoring
- Pre-defined routes from plant to site
- Route deviation alerts to prevent unnecessary detours
- Exact travel time tracking for each trip
- Loading time at plant and unloading time at site recorded
3. Drum Rotation Monitoring
Sensors connected to the transit mixer drum track:
- Drum rotation status — rotating or stopped
- Rotation speed — proper agitation maintained
- Stopped duration — alert if drum stops too long (concrete setting risk)
4. Delivery Verification
- Geofence around delivery sites for automatic arrival logging
- Time at each site recorded for billing accuracy
- Number of trips per vehicle per day
- GPS-verified trip reports for customer invoicing
5. Fleet Efficiency
- Trips per day per vehicle — optimize for maximum utilization
- Idle time analysis at plant and site
- Fuel consumption per trip and per cubic metre delivered
- Vehicle maintenance scheduling by engine hours
Benefits for Cement Companies
- 95%+ on-time delivery rate
- Near-zero concrete waste from late deliveries
- 20% more trips per day through better dispatch
- Accurate billing with GPS-verified trip data
Track Your Cement Fleet with EcoCosmo
- Phone: +91 9130062233
- Toll Free: 1800 209 3995
- Website: www.ecocosmogps.com
